Category Archive : News

driving lessons gold coast

Steps to Survive Defensive Driving School

It can be almost impossible for anybody to make a judgment in the quality of a driving school by simply looking at their internet site or car, therefore we offer you a money back guarantee.
We’re a completely independent organization that works with 100’s of localized driving instructors who you will be pleased to learn to drive with.
As the driving instructors we use are extremely confident with their skills and expertise we’re able to say to you, “if you do not like the lesson we will repay you”

All you have to do is phone our office and we will find you a local instructor to match your requirements.

You may want an instructor at the weekends, what about a female driving instructor, or you want to pass rapidly.
They are all needs that happen to be personal to you and we will get you the most suitable approved driving instructor.

If after the first driving lesson you’re not completely satisfied and don’t wish to stick to the instructor we can either refund you or help you find a new driving instructor, it’s your option.

How to Save Over Driving Lessons

Would you like to save £500 on passing your driving test and getting your license? Let us show you how.
The first thing you must do is stay away from going for a special offer such as Ten hours for £99.

If you do not like the approved driving instructor it will be very hard work for you, and you may not learn a whole lot.

Many of these types of special deals possess terms and conditions which usually imply 4 or 5 hours are held back to the conclusion of the course.

Out of desperation you may give up, and stop taking Driving Lessons Gold Coast before you opt to find another school.

The DVSA state that the average amount of hours taken to complete the driving test is 47 using an approved driving instructor with another twenty hours on top of that from private training.

This average consists of many different types of learners and for that reason is distorted from exactly what can be achieved.
Frequent and regular driving lessons can help you center on your objective which in turn will support the speediness of your progression.

In case you are only having to take One hour a week or you are skipping weeks your training will be slow and you may need more hours overall.

And are you aware it costs somewhere around £200 a time when you fail your driving test?
So if you find an approved driving instructor who you like before you make a block reservation,
just take two hours of training weekly as a minimum, 4 hours whenever you can,
and go through help guide to passing your driving test the 1st time then you could save anywhere between £500 and £1000 on getting your driving license.

How to Pass Your Driving Test First Time

Each day our company is asked the question by beginner drivers regarding how to pass your driving test at the first try.

This is exactly what we advise you have to be carrying out many people flunk their test as they are not aware of exactly what the driving examiner is looking to get.

Most students will declare they have to show the driving examiner they’re a safe driver, that is acceptable, but what would you really mean by safe?
If you’re able to have an understanding of what it really is to be safe from the initial lessons then you’re really going to build up natural and good characteristics for the driving test.

Following the Highway Code as well as the legal aspects of driving is imperative.

Being conscious of your surroundings and being in the position to respond to that is vital.
At no time should you be in the situation where you may be not in 100% control of the vehicle.

Should you follow all of these 3 basic steps from the first driving lesson successfully completing the driving test will always be easier.
By simply putting these tips into practice from the start of your driver training, getting the driving license is likely to be easier.

When you begin the driving lessons the instructor will give you a syllabus of training.

The form you’re offered shows each of the techniques you’ll need to pass the driving test and also the form additionally scores your proficiency.

The highest technical proficiency you are able to reach is known as “independent” and that is when you’re able to carry out the technique without having help and for that reason sufficiently good for the driving test.

Prior to taking your driving test you will need to be on your driving lessons driving with no guidance or support from the driving instructor
You will not require anything at all or anybody else to state you are sufficiently good due to the fact now you possess the evidence you are able to drive without having assistance.

To achieve the best possibility of passing the driving test you must have had every one of these points ticked off.

Driving Lessons Gold Coast
Driving Lessons Gold Coast

Is The Approved Driving Instructor Accredited?

You have to be conscious that some driving schools will set you with a trainee driving instructor rather than somebody fully qualified.
A number of trainee driving instructors can be quite good, well-mannered and will work hard for you, nevertheless they don’t possess the full range of competencies – should you be notified of this?

You will have no fears here for the reason that we simply offer fully qualified driving instructors.

Exactly what will We Charge you?

On your very first driving lesson we look for £25 and that’s for a 2 hour driving lesson.

The local charge will be applied for the following driving lesson if you’d like to continue.
After we have matched up your requirements and determined the most effective driving instructor, we are going to needless to say provide you with their typical fees.

What Can Be Expected On Your Very first Driving Lesson?

You’re driving instructor will certainly phone before driving lesson to set up where to meet you.
Make sure you have, your provisional license to give the instructor, this is for their insurance cover
Your driving\ instructor is going to drive you to a vicinity clear of traffic very shortly you will find yourself switching on the engine, driving, and getting a good time.

Selling Policies and Seller Code of Conduct

All sellers are expected to adhere to the following policies when listing products on Amazon. Seller offenses and prohibited content can result in suspension of your Amazon account.

Seller code of conduct

Amazon enables you to reach hundreds of millions of customers. We strive to ensure a fair and trustworthy buyer and seller experience. At Amazon, we expect you to adhere to the code of conduct principles outlined below. Violation of the code of conduct principles may result in the loss of your selling privileges and removal from Amazon Marketplace.

Seller Code of Conduct Principles:

  • Adhere to all applicable laws and abide by all Amazon policies.
  • Maintain current account information.
  • Never misrepresent yourself.
  • Always act in a manner that ensures a trustworthy experience for Amazon customers.
  • Never list products that may cause harm to Amazon customers.
  • Never engage in any misleading, inappropriate or offensive behavior. This applies to all your activities, including but not limited to:
  • Information provided on your account
  • Information provided in listings, content or images
  • Communication between you and Amazon or you and our customers
  • Act fairly at all times. Unfair behavior includes but is not limited to the following:
  • Behavior that could be deemed as manipulation or “gaming” of any part of the buying or selling experience
  • Actions that could be perceived as manipulating customer reviews, including by directly or indirectly contributing false, misleading or inauthentic content
  • Activities that could be perceived as attempting to manipulate Amazon’s search results or sales rankings
  • Actions that intentionally damage another seller, their listings or their ratings
  • To learn more about Amazon Seller Policy Violation and review a few examples, please watch this short video.

Selling Policies and Seller Code of Conduct

  • Category, product, and listing restrictions
  • Product detail page rules
  • Prohibited seller activities and actions
  • Prohibited Content
  • Condition guidelines
  • Drop Shipping Policy
  • ASIN creation policy
  • Supply Chain Standards
  • Standards for Brands Selling in the Amazon Store
  • Imaging and Video Services Terms and Conditions
  • Japanese Consumption Tax

Gas Ducted Heating In Melbourne Has Never Been Easier

With energy prices soaring there’s no wonder Melbournians are calling for a better solution to their heating needs. Everlasting Air understands that different homes require different systems. Which is why we stock products that implement alternative gas ducted heating methods to better suit residential installations and the environment at large.

Ducted Gas V Reverse Cycle Heating – Why the change?

It has been our experience that resident’s wallets are no longer keeping up with the rising costs of energy. This situation has forced consumers to search for a more cost-effective alternative to heat their homes. Which is important to remember if you are planning on installing heating systems in residential areas.

Therefore, gas ducted heating repairs Melbourne has become the superior method for heating residential homes. Reverse cycle air conditioning demands more energy and is 3-4 times more expensive per kwh than gas, depending on your provider. So, with Melbourne’s winter months only getting colder the running costs are going to follow suit.

Who we trust

Everlasting Air partners with a multitude of leaders in the heating and air conditioning industry. Who we trust is important to us and we have found that a handful of our suppliers really meet the needs of consumers looking for a competitive edge over energy costs.

We have handpicked two of our leading brands qualified to combat rising costs in the residential sector. By implementing these units within your residential projects, you will find an increase in interest and demand which will in turn compliment your business.

Recommended gas ducted heating brands include:

Braemar – The Braemar gas ducted heating range has been recognised for its energy efficiency with awards from the iconic United Nations Association of Australia and more.

Lennox Gas Furnaces – Lennox focus on home comfort which includes the innovative development of energy efficient residential furnaces offering high efficiency ducted gas.

If you’re from Melbourne let us know what your experience has been using one of these products by commenting below.

For Gas Ducted Heating in Melbourne

Create the optimal air environment in your home with a tailored gas ducted heating system from Everlasting Air. Call us today on (03) 9335 2900 for further information.

Parental Alienation

The Life of the Alienated Parent

In today’s changing social landscape, divorce has become a significant and immutable feature. Currently, more marriages end in divorce than do not. The reasons for this are many and complex, and although these reasons are debated, the fact of the predominance of divorce is not disputed. With this upswing in divorce comes also an explosion in the number of children of divorce.

Due primarily to social and legal changes that occurred in the 1970’s, the dilemma of where and with whom the child would live primarily became a reality that more of us knew directly or indirectly. Simply put, child custody disputes have become a much more prominent feature of our everyday lives. Children are routinely fought over in custody disputes, and seldom does a day pass that one does not hear of some tragic and sometime violent event that occurred in the context of a custody dispute. Related to this, the courts have become choked with allegations of one spouse abusing the other spouse and/ or the children, again in the context of one of these custody disputes. It is within this complex social and legal issue that the terms Parental Alienation and Parental Alienation Syndrome were born.

Parental Alienation

This website is devoted to addressing this phenomenon of Parental Alienation and its legacy Parental Alienation Syndrome, also known as PAS. The purpose of this website is for the education of parents, mental health professionals, attorneys and judges, who find themselves dealing with these terribly difficult issues.

The sponsor of this website is Brian Ludmer in private practice in Canada. His practice is primarily devoted to dealing with all aspects of Parental Alienation Syndrome that is its evaluation and diagnosis as well as its treatment. He worked extensively with the late Richard Gardner, M.D., who first described the syndrome in 1985. He, along with Dr. Gardner and others in the field, served on the Scientific and Professional Advisory Board of the Parental Alienation Research Foundation in Washington D.C. until its demise in 2000. He has continued working in this field and routinely travels all over the United States, serving as evaluator, therapist and educator regarding PAS.

Plastic Injection Moulding Manufacturers

It appears we’re not the only ones excited about securing our latest contract for Australia Post’s new letter trays, with the Herald Sun publishing the success story last week, titled – “Sneddon & Kingston Plastics is changing at full throttle.”

The article quite rightly describes the 800,000 recyclable trays and 100,000 lids for Australia Post’s new mail sorting machinery as the largest contract in our company’s history – and depicts a rare feel-good story in the current Australian manufacturing climate.

An area often dominated by hard-luck stories about the dominance of cheap offshore suppliers and the downfall of the nation’s automotive industry… it’s certainly nice to hear some positive news regarding plastic injection moulding manufacturers, and here at Sneddon & Kingston Plastics we are extremely proud to be the subject matter of this success story.

As touched on in the Herald Sun’s article, we contribute this ‘against-the-grain’ contract success to our ongoing focus on innovation and adaptability. Being formally engaged in contract moulding services for the automotive industry, we were forced to adapt a few years ago when it became evident the automotive supply chain would not survive in this country. We invested in advanced automation and decoration technology, developed advanced plastic injection moulding services, and established a packaging process called “In Mould Labelling”, making it possible to work on more complex, specialised and short lead-time projects.

In Mould Labelling uses high precision automation equipment to place labels in the mould, becoming one with the moulded tray. This creates high quality and cost effective branding on products, which satisfied the Australia Post’s requirements perfectly.

Advanced technologies also helped us to develop our own product range of containers used mainly in the food industry, and whilst we see the packaging industry as our long-term direction, contract moulding work such as the Australia Post mail bins ensures we retain the skills we have developed, and provides a huge boost in ensuring our survival in the current environment.

To echo the words of our General Manager and third generation SK Plastics employee, Blair Sinsheimer:

“In an environment where companies are turning to foreign suppliers for goods, it’s great to have the support from one of Australia’s most trusted and recognised brands… We applaud Australia Post for keeping this work within Australia”.

We are on track to deliver the last of the new recyclable trays at the end of October, a move that will see the phasing out of the iconic white Australia Post boxes.

Innovative Coating Solution for Airport Infrastructure

Melbourne Airport (Asia Pacific Airport Corporation – Melbourne [APAM]) commenced a beautification program of works to the existing Melbourne Airport Terminals 1, 2 and 3 in the middle of 2016. As part of the program existing concrete infrastructure, including building facades, pedestrian bridges, elevated roads, carpark ramps and overpasses required painting to strict specifications.

The APAM concrete infrastructure beautification program required conformance to a challenging timeframe and could not interrupt airport operations.

PrimoGuard decorative coatings were chosen over competitive systems, due to a number of considerations including; no disruption to airport operations, fast application time, application in low temperature environment, and surety of completion to timelines,and previous experience and with PrimoGuard on airport bridges and overpasses.

Nanokote was engaged to supply and install PrimoGuard coatings to approximately 30,000 square metres of infrastructure, being building facades, pedestrian bridges, elevated roads, carpark ramps and overpasses.

The PrimoGuard application program required assessment of the existing concrete infrastructure (some of which was up to 40 years old), development of a detailed works program, and selection of optimal application methodologies (brush, roll and spray) in order to satisfy the customers’ requirements.

By working flexible work hours, throughout days and nights, with multiple application crews deployed to separate work fronts in order to avoid disruption to passengers and airport operations, Nanokote was able to successfully complete the beautification coating program within eight weeks.

Nanokote was able to minimize impacts to passengers and airport operations because PrimoGuard there was no requirement for the applicators to return to the work area more than once, allowing:

  • Application work to be undertake quickly
  • Minimal application interruptions due to changes and adverse weather
  • No disruption to airport and passenger traffic
  • No disruption to passengers and pedestrians in peak periods
  • Standard access equipment to be employed
  • Flexibility of moving from one work areas to another to suit operational needs
  • Substitute PrimoGuard for other coating systems on metal substrates.

PrimoGuard offers the following advantages to the airport :

  • Surface water ingress into the waterproof concrete sealer is prevented, due to the PrimoGuard temperature resistant coating properties.
  • Existing lighting outside the Terminal entries became more effective due to the reflectivity of the coating (possibility to reduce the electricity use)
  • Concrete surfaces became easier to clean(possibly to reduce labour time)
  • Concrete cancer repair coatings less susceptible to damage from high pressure cleaning, due to the extremely strong adhesion of PrimoGuard to the concrete.

Nanokote has been working with government authorities and private asset owners, along with specifiers around the world for more than eight years as need for next generation concrete coating materials has expanded. Best practices to achieve cost efficient design, enhanced service life, reduced maintenance costs have continued to be focal points for major infrastructure asset owners.

PrimoGuard is a single coat system for anticarbonation and anti-corrosion requiring no priming that allows a single coat to be directly applied to dry or damp waterproof concrete sealer.

This replaces typical competitor coating systems requiring three-coats: primer and two separate coats of acrylic applied 24 hours apart.

Single coat application offers for major savings when carrying out works on infrastructure where 24 hour operations exist and no disruption to operations and passengers are required.

9 Common Causes of Construction Accidents

There are many causes of accidents on a construction site. Many are often attributed to some form of negligence and may involve unsafe work areas, misuse of tools and equipment, and failure to use protective equipment. The following discusses the nine most common examples of construction site accidents.

Unsafe Working Areas – Injuries due to slip and falls are among the most common on a company’s Calgary site. Unsafe conditions include uncovered holes or trenches and exposed stakes and rebars (which implement hazards to those working or walking above them).

Falling Hazards – A common injury that occurs when a worker near an open-sided floor focusing on his work, steps backwards or to the side without looking. Another falling hazard occurs on stairwells with no guardrails. In this kind of accident, workers frequently land on their heads or shoulders.

Misuse of Stepladders – This is one of the leading causes of injury and long-term disability in Alberta. An injury can occur when a worker falls from a tipped-over stepladder. Another accident that can occur with stepladders is when tools are left on the top platform. When someone moves the ladder, the tools fall on someone’s head. Using household ladders on a construction companies Calgary can also lead to accidents, as these types of ladders cannot take the weight and stress of a construction worker with tools.

Roof Construction Falls The number one cause of death in construction occurs where no fall protection is provided. Falls can occur when anchors (designed to provide fall arrest with an attached lifeline) are not properly attached or more than one lifeline is on a single anchor.

Scaffolding Problems Alberta State regulations mandate that a “competent person” must supervise erecting scaffolds. This is someone capable of identifying hazards and who has the authority to take prompt corrective measures. Despite these regulations, scaffolding accidents still occur through unsafe access to scaffolds and tools and other materials falling off scaffolding and injuring workers.

Collapsed Excavation Walls and Trenches – In the state of Alberta, collapsed excavation walls or trenches kill an average of two workers each year. The weight of soil (2000-3000 pounds per yard) prevents a trapped worker from breathing, leading to death within minutes.

Power Tool Accidents – These accidents are frequently caused by not using appropriate eye and ear protection. Nail gun injuries have increased each year making eye injuries quite common. It’s not surprising given that a nail comes out of the gun with the equivalent force of a .22 caliber bullet. Also, not having proper guards in place on the power tools can lead to cuts and amputations.

Lifting/Body Straining – The number one cause of injuries, disability claims and medical costs in construction companies Calgary are soft tissue injuries-strains, sprains and chronic injuries. These are a result of lifting with the back instead of using the legs and not using panel lifters when carrying sheets of drywall, plywood, or siding.

Vehicle Accidents – Forklift accidents are responsible for workers’ deaths each year in Alberta. A common accident occurs when turning or maneuvering the forklift with the load raised. Another dangerous construction companies Calgary site vehicle is the dump truck. A frequent accident involves the dump truck backing up and hitting a pedestrian.

As you can see, a construction site can be quite dangerous. However, many of these accidents can be avoided through common sense and protective measures. Prevention begins with adequate awareness and a properly maintained working environment that is safe and secure.

Benefits of Using Aluminium Balustrading

Aluminium Balustrades and aluminium privacy screens give a sophisticated and contemporary appeal to your house. If you’re renovating or building a new home choose materials that convey quality and durability. Use aluminium for balustrading and other home features to provide you with stylish surroundings and enhance your home’s street appeal.

Designing for the Brisbane climate and lifestyle

Stair Balustrades Brisbane

Brisbane is a warm climate city known for its distinctive architecture and love of modern design trends. The people of Brisbane enjoy a relaxed, warm climate lifestyle but are also prepared for the damaging thunderstorms that bring hailstones, torrential rain and battering winds that arrive in the summer months.

Aluminium is an ideal product for giving your home a stylish look and for withstanding everything the Brisbane climate can throw at it.

Aluminium balustrades are practical and beautiful

Balustrades are an important design feature in many homes. They need to provide safety and they need to look beautiful. Stair balustrades Brisbane are used principally to prevent people from falling off heights – stairs, balcony’s and porches, and rooftops. Are you concerned about the integrity of any of your existing stair balustrades Brisbane? Did you inherit an eyesore when you bought your new home? We can design and manufacture a solution for you that incorporates safety and beauty to create a compelling architectural feature.

Complete Design Fabrication has over a decade’s experience manufacturing and installing aluminium balustrades. We know the building regulations and we monitor emerging trends. All of our products and services meet Australian and Local Building Standards. We consider all these aspects so that we can deliver you the best advice and result for your project.

Aluminium privacy screens are easy to install and complement any space

Aluminium privacy screens are an ideal way to create stylish backdrops in your house and garden. Use them to hide bins, water tanks or utility service infrastructure, or use a privacy screen to create a feature of your BBQ, pool or other areas in your garden.
Aluminium privacy screens can be fitted to your balcony, patio, deck or spa to create private spaces in your house and garden.

Aluminium is safe and easy to care for

Aluminium retains its popularity as a building material for balustrades and privacy screens because it is a strong, light material that retains its shape and needs little maintenance. We use the latest innovations in manufacturing practices to produce high performing and beautiful looking aluminium.

Aluminium is corrosion resistant which makes it a safer option than most other materials. Timber needs regular maintenance and can rot, shrink and warp, wrought iron can rust and corrode. Give yourself peace of mind by knowing family and visitors to your house are safe.

Cleaning aluminium is simple – wipe down with a wet sponge or use a mild household detergent to remove dust and other deposits.

Your time is precious – avoid materials that will see you spending future weekends carrying out maintenance and repair duties.

A beautiful house and garden with versatile aluminium

Aluminium is strong and durable while also providing visual beauty and freedom of design. Our team will work with you to create a balustrade or privacy panel that suits your style aesthetic and budget.

Bring your design inspiration ideas to us and we’ll help design the ideal solution for your home.

Methods of Detecting Leaks in Compressed Air Systems

Our innovative press fitting system guarantees reliable service and a lengthy lifespan. However, it is unavoidable that in time, Gas Piping System develops leaks. For compressed air systems, even simple leaks can have consequences, especially on the bills. When in doubt, the smart move is to hire professionals to check your pipes and pumps. It’s also a good idea to schedule routine checks for early detection of any possible issues and to have peace of mind.

What methods are used to detect problematic pipes? Here we present to you the most common ways that professionals can locate leaks in your piping systems.

The Paintbrush Method

This one is pretty simple and straightforward. A paintbrush is used to apply soapy water on a questionable segment of your piping system. If bubbles emerge, there’s a leak present. Although this test does not require a professional, it comes with limitations.

If you suspect a leak, this system might not categorically verify system integrity. It’s also limited to smaller compressed air systems and not complex designs.

Ultrasonic Sound Detection Systems

Air leaks are invisible especially when they are minor. Most of the time, the hissing sound they give off is inaudible to the human ear. Here’s where the use of ultrasonic detectors come in.

This professional tool has directional microphones that listen to the sound of air leaking. The method also guides the user to the exact location of the leak.

This system is appropriate for compressed air systems that are more complicated in design.

The Role of Press fittings

When a leak is detected, repair is in order. Europress Group’s Gas Piping System fittings are the ideal system to use when replacing leaky parts. It is up to ten times faster to install than traditional methods. Also, without the use of open flames or welding systems, it’s also safer with no open flames or welding permits required.

The loss of resources and pressure due to of leaks shouldn’t be underestimated. They are a considerable waste to any operation. Checking systems ensures that your piping works as efficiently as it should and can avert future difficulties.

cheap driving lessons Gold Coast

How Much Does It Cost to Get a Driving Licence?

In our last post we were talking about getting a cheap driving lessons Gold Coast. Today we will look at a financial side of learning. I guess nobody would expect learning to drive could be cheap. Check out how much you will have to pay and how you can cut your tuition expenses.

Statutory Fees

Your overall expenses can be divided into two groups. One group includes statutory fees. In other words, fees you will pay to driving authorities. Your first pounds will go to the Driver and Vehicle Licensing Agency (DVLA) for your provisional licence. You are not legally allowed to start learning to drive without provisional licence. So you will need to pay $50 to get started. The next fee is $31 – that much you pay to take your theory test. Be aware that if you fail to pass your test, the fee is not refundable. You will have to pay again to get a second chance. Finally, you will have to part with $62 before you can book your practical driving test. It works the same way as with your theory test. Failed test means you’ve lost your money. There is no way to cut on your statutory fees other than passing your tests with flying colors.

Tuition Fees

It is this portion of your expenses that may greatly vary. The total of your tuition expenses will much depend on a driving school or driving instructor you choose and your driving experience.

Choosing the right driving school or driving instructor is crucial if you want to get value for money. Make sure you avoid two equally disadvantageous extremes – overpriced offerings from heavily advertised schools and underpriced bargains from self-employed driving instructors. What you need to search for is a driving school that is able to provide a combination of the highest pass rate and reasonable price for value. But what is that reasonable price?

We have done a research on the web, asking industry professionals and driving instructors about a basic cost of driving lesson. The cheapest you can find is about $10-12 and the most expensive may reach $25. Remember the extremes? Right! We are looking for a reasonable average, which is actually a fair market price. That average stands at about $17-19.

cheap driving lessons Gold Coast

cheap driving lessons Gold Coast

Having calculated an average fee for cheap driving lessons Gold Coast, we now need to find out how many lessons you need to get enough practice for your practical driving test.  We will look at a learner who is between 17 and 25 years of age with no or little driving experience. Based on our extensive teaching experience we can say that a person from this group will need to get up to 25 lessons. With 25 driving lessons and $17-19 average, we arrive at $425-475 to complete your driving courses.

Note that more experienced learners will need fewer driving lessons so their expenses would be lower.  More lessons are required for learners who are too nervous or timid. Another thing that can add to the number of lessons is your age. Experienced driving instructors say that learners older than 25 basically need to get more hours of training.

Driving lessons are not the last thing a learner has to pay for. Obviously, you will need plenty of training aids to get ready for your driving test. It will depend on each individual learner how many aids he or she would use. The basic cost of training aids that you REALLY need is around $10-15.